In case the material is transported at temperature lower than 15°C, the material must be handled in the manufacturer’s package under the conditions, excluding bending and shock impact, to guarantee the material’s safety.
The material must be stored in piles not higher than 1,5 m in dry warehouses at temperature not higher than 40°C, horizontally, on a plane surface not closer than 1m to heating facilities, under the conditions, excluding moisture and oil penetration and exposure to sunlight.
In case the material is stored in an unheated warehouse, it should be transported to the production facility under the conditions, excluding bending and shock impact.
Installation and Exploitation requirements
The material must be installed on clean dry painted metal surfaces, including complex surfaces. To clean the material of dirt, it is recommended to use water with neutral abstergents, not containing organic solvents and alkali. Upon dismantling, the material can’t be reused.
Preparation for installation
In case the material is stored or transported at temperature lower than 15°C, before installation it must be kept at temperature (18-30) °C for not less than 24 h in manufacturer’s package. The working space temperature must be (18-30) °C.
The mounting surface must be cleaned of dust and dirt, unoiled with technical solvents and kept until completely dry.
