Skip to product information
1 of 3

Standartplast Canada

STP Silver 1.8mm (70mil) 48 sqft car Sound deadening mat, Butyl Rubber Automotive Sound Deadener

Regular price $166.32 CAD
Regular price Sale price $166.32 CAD
Sale Sold out
Shipping calculated at checkout.
  • CLEAR SOUND FOR BEST PRICE! SALE PRICE $2.7/sq ft (Original $3.33/sq ft) is half the price of leading sound deadener product in Canada. Standartplast Black Silver is ideal for car audio enthusiasts that are looking for great quality at a budgetary price!
  • FINALLY IN CANADA! The most popular sound and vibro deadener material in the world. Over 25 years in sound proofing automotive industry. Standartplast soundproofing and insulating products are present in over 70 countries around the world. Our technologies are used in submarines, space ships and celebrities’ air-jets world-wide.
  • OEM SPECIFIED PRODUCTS! Standartplast products are used by automotive manufacturers, such as General Motors, Ford, Renault, Hyundai, VW Group, Nissan and others. You get the best quality approved by leaders of car manufacturing industry at the best price. Standartplast R
  • SPECIFICATIONS: Nominal thickness 1.8 mm (70 mil); Total coverage area of 48 sq. feet; Number of sheets in the package: 12 (folded in half); Nominal sheet Size 750 x 500 mm (30inch x 20inch).
  • CHAMPIONS CHOOSE STANDARTPLAST! Our products are used by winners in car-audio competitions, such as dB Drag, IASCA, EMMA etc. Truck, Muscle, Resorted and Sport cars owners choose Standartplast sound insulation materials.

Application: Doors, Roof, Fire-wall, Wheel arches, Trunk compartment, Bonnet, Trimming.

Package size: 4.5 m2 (48.4 sq ft)
Package contains: 12 sheets
Sheet size: 750 x 500 mm (30inch x 20inch)
Thickness: 1.8 mm (0.07inch)

Price per sq m: $35.55
Price per sq ft: $3.30

STP BLACK SILVER is used as a vibration-damping coating in vehicles, agricultural machinery and other objects, which must meet particular requirements of effective sound and vibration reduction. The material is designed to be used at temperatures from -45 to 100°C; the material can survive short-time action of temperature up to 190°C.

The material is a construct, consisting of foil with embossment and printed logo, and an adhesive polymer layer protected with anti-adhesive paper. To improve anti-corrosion properties, the material contains corrosion inhibitive composition.


Transportation and storage

The material must be handled under the conditions eliminating moisture penetration. It is prohibited to drop or bend packages.

The packages must be transported horizontally on a plane surface in any roofed types of transport in compliance with haulage rules for this type of transport under the conditions eliminating mechanical damages, material deformation, and moisture penetration.

It is prohibited to put any heavy metal and alike objects on packages. Storage

The materials must be stored at temperature not higher than 40°C, horizontally, on a plane surface, not closer than 1m from heating appliances, under the conditions eliminating moisture and oil penetration and exposure to sunlight, in piles not higher than 1 m.

Exploitation and installation requirements

The material must be installed on dry clean painted metal surfaces, including complex surfaces. To clean the surface of dirt, it is recommended to use water with neutral abstergents, not containing organic solvents or alkali.
Upon dismantling, the material can’t be reused.

Preparation for installation

In case the material is stored at temperature lower than 0°C, before use it must be kept at temperature (20±5)°C for minimum 24 h.

The working space temperature must be (18-30) °C.

The mounting surface must be cleaned of dust and dirt, unoiled with technical solvents and kept until completely dry.


Antiadhesive paper must be peeled off systematic, smoothly; the detail must be pressed to the surface, avoiding air blisters formation.

The material mustn’t be installed on dirty, corroded metal surfaces.

Coefficient nomination


Testing method

Thickness, mm


TD 5772-006-48214265- 2001

Weight of 1m2, kg, max


GOST 17073-71

Mechanical loss factor at temperature, not less


ISO 6721-3:1996

Flammability, rate of combustion, mm/min, not more than

Non-flammable 100

GOST 25076-81

Material-to-metal surface bond strength when peeling off, N/cm, min


TD 5772-006-48214265- 2001

Anti-adhesive paper-to-adhesive polymer layer bond strength, N/cm


GOST 17317-88

Material-to-metal surface bond strength when peeling off after impact of temperature cycling from -45°C to +70°C, N/cm, min


TD 5772-006-48214265- 2001

Customer Reviews

Based on 3 reviews
Mike Deridder
Good product

Easy to work with would recommend and buy again. Fast shipping

Shawn Becker
It’s a good product I like sky high better

It’s good

John Green
Absolutely the best price/quality ratio

Amazing quality!